Uni Exim is the medium size factory produces high quality lightweight pots and planters.
For more than 10 years of producing and exporting, we gain much experience and skills to make the qualified products for the International markets.
Here we give a short description how we make the fiberglass/fiberstone planters.
1. Making the mold:
The mold is filled with the correct ratio of fiberglass and high-quality polyester resin.
2. High-quality polyester resin is then applied several times over the mold to create the final product.
3. Once the final coat becomes hard, the planter will then be taken to the finishing department where each product is meticulously finished by hand. The finishing department trims the product of any excess materials and evenly sands the fiberglass surface untill it ‘s smooth.
4. Painting and cover layers on the exterior.
the products first get several ground layers and then 2 to 4 UV proof top coats, depending on item and the desired finish. After painting, the products are placed in the drying rooms for several hours until the paint is completely dry.
5. When dry, the products are piece by piece subject to a very thorough quality check. After approval, packaging will be done on the basis of the customer’s requested packaging instructions. Containers can be loaded with pallets or loose cartons.
